The Husqvarna 32 (or Husky 32) is a small 32cc top-handle saw that was introduced in 1977. It was produced by Solo and is the same chainsaw as the Solo 600.
There is also a Husky 32 VR version, which is the same chainsaw with an anti-vibration handlebar, rather than a rigid handlebar.
The featured image comes from user Frits on chainsawcollectors.se, where you can find more great pictures.
| General Information | |
| Manufacturer | Husqvarna Vapenfabriks AB – Huskvarna, Sweden |
| Year introduced | 1977 |
| Operator configuration | One-man operation |
| Construction | Die-cast magnesium |
| Colour scheme | Husqvarna Orange |
| Engine Specification | |
| Cylinder displacement | 32 cc (1.95–2.0 cu in) |
| Number of cylinders | 1 |
| Cylinder bore | 38 mm (1.50 in) |
| Stroke | 28 mm (1.10 in) |
| Cylinder type | Chrome-plated aluminum |
| Intake method | Piston ported |
| Ignition System | |
| Magneto type | Phelon |
| Ignition timing | Fixed |
| Breaker point gap | 0.35–0.45 mm (0.014–0.017 in) |
| Flywheel/coil air gap | 0.25 mm (0.010 in) |
| Spark plug | Bosch WKA 175T6 (or equivalent) |
| Spark plug gap | 0.5 mm (0.020 in) |
| Fuel & Lubrication System | |
| Carburetor | Walbro HDC-29 / HDC-52 (all-position with fuel pump) |
| Fuel tank capacity | 0.30 L (268–300 cc / approx. 10 fl oz) |
| Fuel mix ratio | 20:1 (break-in), 25:1 (normal) |
| Recommended fuel | Regular gasoline |
| Oil specification | Two-cycle mix oil |
| Chain lubrication | Automatic piston pump |
| Oil tank capacity | 0.088 L (88 cc / 3 fl oz) |
| Drive & Clutch | |
| Clutch type | Centrifugal |
| Drive type | Direct |
| Chain brake | None |
| Handle system | Rigid (32 VR used anti-vibration handle) |
| Crankshaft main bearings | Caged roller type |
| Cutting Equipment | |
| Chain pitch | 3/8″ low profile |
| Chain type | Oregon 91-S Low Profile |
| Bar mount pattern | 01 |
| Shortest guide bar supplied | 30 cm (12 in) |
| Longest guide bar supplied | 40 cm (16 in) |
| Weight | |
| With 30 cm (12 in) bar & chain | 4.8 kg (10.6 lb) |
Manuals:
More about the Husqvarna 38.
