The Husqvarna 22 was one of Husqvarna’s early lightweight homeowner saws in the 1970s, marketed under the “Husky” branding in some regions.
It predated the later 30cc-class saws like the 33, 34, and 35 series and reflected the simpler design philosophy of the era:
- Breaker-point ignition
- Manual oiling
- No chain brake
- Rigid handle system
| General Information | |
| Manufacturer | Husqvarna Vapenfabriks AB – Huskvarna, Sweden |
| Production era | Early–mid 1970s |
| Operator configuration | One-man operation |
| Construction | Magnesium crankcase & aluminium components |
| Colour scheme | Husqvarna Orange |
| Engine Specification | |
| Cylinder displacement | 22 cc (1.34 cu in) |
| Number of cylinders | 1 |
| Cylinder type | Aluminum with chrome-plated bore |
| Intake method | Piston ported |
| Maximum engine speed | Approx. 7,000–8,000 rpm |
| Ignition System | |
| Magneto type | Breaker-point ignition |
| Ignition timing | Fixed |
| Spark plug | Champion CJ6 (typical) |
| Spark plug gap | 0.5–0.6 mm (0.020–0.025 in) |
| Fuel & Lubrication System | |
| Carburetor | Tillotson diaphragm type |
| Fuel tank capacity | Approx. 0.25 L (0.53 US pt) |
| Fuel mix ratio | 40:1 |
| Recommended fuel | Regular gasoline |
| Oil pump | Manual |
| Drive & Clutch | |
| Clutch type | Centrifugal |
| Drive type | Direct |
| Chain brake | None (early production) |
| Handle system | Rigid |
| Cutting Equipment | |
| Chain pitch | 3/8″ low profile |
| Typical guide bar length | 25–30 cm (10–12 in) |
| Weight | |
| With bar & chain | Approx. 4.0–4.5 kg (8.8–9.9 lb) |
The Husky 22 (Husqvarna 22) is a small, early-1970s consumer saw—often described by collectors as an “early ’70s Husqvarna 22”—that shows up in a distinctive white/cream “easter-egg” oval-bodied form, with some versions believed to have been built/assembled in Canada by Trail/Quadra (TML) for multiple brands.
It was introduced in 1973, displaces 34.4 cc, and is very light at 2.77 kg / 6 lb 11 oz (powerhead only); it’s a direct-drive, centrifugal-clutch one-man saw with no chain brake, manual oiler, Phelon ignition, and typically a Tillotson HU-18C or Walbro WA carb. Factory bar range is listed as 12″ to 16″, running 1/4″ pitch chain (Oregon “25” type), with working RPM around 6,500 (12,000 no-load).
There are very few pictures of or threads on the Husky 22 online, but here are a few:
- AcresInternet.com (specs)
- ChainsawCollectors.se (the most detailed discussion)
- ArboristSite.com (pictures)
